TiLDA MK3/build

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Dependencies

You can use either windows or linux, although windows will not have most things installed by default

git, make, python, etc

I will just assume you have this

arm-none-eabi-gcc

https://launchpad.net/gcc-arm-embedded/+download You will have to make the arm-none-eabi-gcc from the bin directory available to your system (add to PATH, symlink or copy)

On Ubuntu you can follow these instructions: https://launchpad.net/~team-gcc-arm-embedded/+archive/ubuntu/ppa

On Debian (in Stretch, maybe earlier versions too, also Raspbian Jessie) you can `sudo apt-get install gcc-arm-none-eabi`

pyusb

sudo pip install pyusb

USB Permissioning on Linux

On some Linux distributions it may be necessary to add additional udev rules in order to allow the REPL to work:

copy the following text to /etc/udev/rules.d/49-tilda-mk3.rules

# 0483:df11 - Tilda Mk3 based on Micropython board
ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", ENV{ID_MM_DEVICE_IGNORE}="1"
ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", ENV{MTP_NO_PROBE}="1"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE:="0666"
KERNEL=="ttyACM*", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE:="0666"

And then restart the udev service:

sudo udevadm control --reload-rules

Flashing

# Clone this repo
git clone --recursive https://github.com/emfcamp/micropython.git 

# Switch to our work branch
cd micropython
git checkout tilda-master

# Now we can build the firmware and flash it to the badge
# You have to boot the badge into dfu mode by pressing down the center
# joystick button while pressing the reset button to trigger a reboot
make -C stmhal BOARD=STM32L475_EMFBADGE deploy

What to do when the firmware update.py script fails

When attempting an update from linux, some users have hit timeouts during hte mass_erase step. This leaves the badge in an ususable state.

$ python update.py 
Hello - Welcome to the automated TiLDA firmware updater
We found your badge. So far, so good...
Traceback (most recent call last):
  File "update.py", line 556, in <module>
    main()
  File "update.py", line 530, in main
    mass_erase()
  File "update.py", line 114, in mass_erase
    "\x41", __TIMEOUT)
  File "/usr/local/lib/python2.7/dist-packages/usb/core.py", line 1043, in ctrl_transfer
    self.__get_timeout(timeout))
  File "/usr/local/lib/python2.7/dist-packages/usb/backend/libusb1.py", line 883, in ctrl_transfer
    timeout))
  File "/usr/local/lib/python2.7/dist-packages/usb/backend/libusb1.py", line 595, in _check
    raise USBError(_strerror(ret), ret, _libusb_errno[ret])
usb.core.USBError: [Errno 110] Operation timed out

If you have access to a Windows PC, you can download the STMicroelectronics DfuSe USB device firmware updater software http://www.st.com/content/st_com/en/products/development-tools/software-development-tools/stm32-software-development-tools/stm32-programmers/stsw-stm32080.html and use the 'Upgrade or Verify Action' part of the GUI to update the firmware instead.

Install the STMMicroelectronics util from the link above.
Download the firmware.dfu file from https://update.badge.emfcamp.org/firmware.dfu and save it off.
Start up DfuSeDemo.exe, and click the 'Choose' button - select the firmware.dfu file and then hit 'Upgrade'
Your badge should now be un-bricked