Difference between revisions of "TiLDA MKe/Full Specification"
Jump to navigation
Jump to search
(Created page with "==Full Specification== The following hardware has been included on the badge. * [http://www.atmel.com/products/microcontrollers/arm/sam3x.aspx Atmel ATSAM3X8E] ** This is th...") |
(No difference)
|
Revision as of 16:20, 1 May 2015
Full Specification
The following hardware has been included on the badge.
- Atmel ATSAM3X8E
- This is the same chip as the Arduino Due and gives us the base platform for the badge
- 32bit ARM Cortex M3 * 84MHz
- 512KBytes Flash RAM
- 96KBytes of SRAM
- A 128x64 pixel monochrome LCD display
- Ciseco SRF Radio
- 868Mhz RF Transceiver
- Simple UART interface
- Low power sleep mode
- MPU-6050 3-axis Accelerometer and 3-axis gyro
- I2C interface
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
- Digital Motion Processing™ (DMP™) engine offloads complex MotionFusion, sensor timing synchronisation and gesture detection
- PMIC & LiPo
- Joystick, 4 way with click
- Buttons
- RGB LEDs
- IR Transmitter
- Arduino Headers
- Pads for wearable tech