TiLDA MK3/spi
Revision as of 22:48, 7 July 2018 by Chrisstubbs (talk | contribs)
See here [1] for the main micropython documentation.
SPI1 is used for the board's onboard wifi.
SPI2 is exposed on the 'X' header, under the white silkscreen section for your name.
from pyb import SPI spi = SPI(2) #create SPI on port 2 spi.init(SPI.MASTER) #set the mode. Other things like baudrate=80000, polarity=1, phase=0, crc=None can be set here spi.send(170) #send int byte spi.send(b'\xAA') #send hex byte