TiLDA MK3/spi

From EMF Badge
Jump to: navigation, search

See here [1] for the main micropython documentation.

SPI1 is used for the board's onboard wifi.

SPI2 is exposed on the 'X' header, under the white silkscreen section for your name.


from pyb import SPI

spi = SPI(2) #create SPI on port 2
spi.init(SPI.MASTER) #set the mode. Other things like baudrate=80000, polarity=1, phase=0, crc=None can be set here

spi.send(170) #send int byte
spi.send(b'\xAA') #send hex byte