Difference between revisions of "TiLDA MK4/Firmware Update"
Jump to navigation
Jump to search
(tweak dfu joystick notes) |
(tweak dfu joystick notes) |
||
| Line 11: | Line 11: | ||
This is how to do it: | This is how to do it: | ||
| − | * Put your Badge into DFU mode. To do so press the centre of the joystick press reset | + | * Put your Badge into DFU mode. To do so press and hold the centre button of the joystick and press reset button, let go of joystick after a second. |
* Run the firmware update: | * Run the firmware update: | ||
** OSX / Linux: Open a terminal, go to your Mk4-Apps folder and run "./tilda_tools firmware-update". | ** OSX / Linux: Open a terminal, go to your Mk4-Apps folder and run "./tilda_tools firmware-update". | ||
Revision as of 22:21, 4 September 2018
TiLDA Mk4 is being actively developed. This doesn't just include changes on the python code (which can be updated via the Badge Store), but also for the firmware. Think of it as updating your operating system. Like an operating system update it's a bit more involved than just updating applications.
Warning: You might potentially lose all your apps and settings.
What you need:
- A computer with USB and a cable to your badge
- A checkout of Mk4-Apps. See here for how to do that
- You need to have http://dfu-util.sourceforge.net/ installed
You should also look up how to use tilda-tools.
This is how to do it:
- Put your Badge into DFU mode. To do so press and hold the centre button of the joystick and press reset button, let go of joystick after a second.
- Run the firmware update:
- OSX / Linux: Open a terminal, go to your Mk4-Apps folder and run "./tilda_tools firmware-update".
- Windows: Todo
- Follow the onscreen information
- Don't forget to press the reset buttons once the firmware update was successful.